This package contains examples for the use of models that can be found in Buildings.Airflow.Multizone.
| Name | Description |
|---|---|
| CO2TransportStep | Model with transport of CO2 through buoyancy driven flow |
| ChimneyShaftNoVolume | Model with chimney effect and a steady-state model of a shaft |
| ChimneyShaftWithVolume | Model with chimney effect and a dynamic model of a shaft |
| ClosedDoors | Model with three closed doors |
| NaturalVentilation | Model with flow reversal due to density difference |
| OneEffectiveAirLeakageArea | Model with an effective air leakage area |
| OneOpenDoor | Model with one open and one closed door |
| OneRoom | Model with one room for the validation of the multizone air exchange models |
| Orifice | Model with an orifice |
| PowerLaw | Model with powerlaw models |
| PressurizationData | Model showing how the 'Powerlaw_1DataPoint' model can be used when data is available from a pressurization test. |
| ReverseBuoyancy | Model with four rooms and buoyancy-driven air circulation that reverses direction |
| ReverseBuoyancy3Zones | Model with three rooms and buoyancy-driven air circulation that reverses direction |
| TrickleVent | Model with a trickle vent modelled using the models with flow based on tabulated data |
| ZonalFlow | Model with prescribed air exchange between two volumes |