modelInverterControlledHeatPump
Extends from Modelica.Icons.Example (Icon for runnable examples), PartialHeatPumpController (Example for usage of heat pump controller).
Information
Example for an inverter controlled heat pump. Play around with the PI settings to see how they influence nSet depending on TSet and TMea.
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| AixLib.Fluid.HeatPumps.ModularReversible.BaseClasses.RefrigerantMachineControlBus | heatPumpControlBus (from PartialHeatPumpController) | Required to make the signals on the bus accessible | |
| Modelica.Blocks.Interfaces.RealOutput | TMea (from PartialHeatPumpController) | Outputs the temperature measurement | |
| Modelica.Blocks.Interfaces.RealOutput | TSet (from PartialHeatPumpController) | Outputs the temperature measurement | |
| Modelica.Blocks.Interfaces.RealOutput | nSet (from PartialHeatPumpController) | Outputs the temperature measurement |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Sources.Sine | T_meas (from PartialHeatPumpController) | Generates the measured temperature | |
| Modelica.Blocks.Sources.Constant | T_set (from PartialHeatPumpController) | Provides the temperature set point | |
| BaseClasses.PartialTSetToNSet | hPController (from PartialHeatPumpController) | ||
| Modelica.Blocks.Sources.Constant | T_oda (from PartialHeatPumpController) | Provides the temperature set point |
Revisions
-
July 14, 2022 by Fabian Wüllhorst:
First implementation (see issue #1128)