recordFLpartition_EnEV2009_L_upHalf
Floor partition after EnEV 2009, for building of typeL (leicht), upper half
Extends from WallBaseDataDefinition (Wall base data definition).
Information
Overview
Wall definition according to EnEV 2009. For detailed wall type see above.
Concept
Attention: The first
element in each vector represents the layer connected to
port_a(outside), the last element represents the layer
connected to port_b(surface facing the room).
References
Record is used in model Building.Components.Walls.BaseClasses.ConvNLayerClearanceStar
Norm:
- Bundesregierung (Veranst.): Verordnung über energiesparenden Wärmeschutz und energiesparende Anlagentechnik bei Gebäuden. Berlin, 2009
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Wall › Wall parameters | |||
| Integer | n (from WallBaseDataDefinition) | 1 | Number of wall layers |
| Modelica.Units.SI.ThermalConductivity[n] | lambda (from WallBaseDataDefinition) | Thermal conductivity of wall layers | |
| Modelica.Units.SI.SpecificHeatCapacity[n] | c (from WallBaseDataDefinition) | Specific heat capacity of wall layers | |
| Modelica.Units.SI.Emissivity | eps (from WallBaseDataDefinition) | 0.95 | Emissivity of inner wall surface |
| Wall › Layer parameters | |||
| Modelica.Units.SI.Length[n] | d (from WallBaseDataDefinition) | Thickness of wall layers | |
| Modelica.Units.SI.Density[n] | rho (from WallBaseDataDefinition) | Density of wall layers | |
Revisions
-
September 5, 2013 by Ole Odendahl:
Added documentation and formatted appropriately -
Juni 1, 2011 by Ana Constantin:
implemented