.AixLib.Electrical.AC.OnePhase.Lines.Examples.ACLine_L

Information

This example demonstrates how to use a purely inductive line model to connect a source to a load.

The model has four different loads. The load sc_load represents a short circuit R=0. The current that flows through the load depends on the inductance of the line.

The remaining three loads R1, R2, and R3 are resistive loads. Each load is connected to the source with different configurations, however the equivalent impedance between each load and the source is the same. Since the equivalent impedances are the same, each load draw the same current.

Revisions

• August 24, 2014, by Marco Bonvini:
  Documentation and example revised.