.AixLib.Electrical.AC.ThreePhasesUnbalanced.Loads.Examples.LoadCtrl

Information

This example model shows how the voltage controller can act on a three-phase unbalanced load.

This model contains two loads: one with voltage control and one without. The loads produce power only on the first phase that is connected through a transmission line to a voltage source. When the power production increases, the losses on the line cause an increase of the voltage at the load. The load with voltage controller detects when the overvoltage happens and unplugs the load for 2 seconds. After 2 seconds the load is plugged again and if this causes an other overvoltage it will be unplugged again.

The model contains both a controlled and a not controlled load so the user can compare the difference in the voltages and powers when the load is unplugged.

Revisions

• September 24, 2015, by Michael Wetter:
  Removed assignment of P_nominal to avoid the warning "The following parameters with fixed = false also have a binding" in Dymola 2016.
• March 10, 2015, by Marco Bonvini:
  Revised documentation of the example.