modelStaticCondenser

Static condenser assuming constant pinch point at condenser's outlet
Diagram of StaticCondenserOpen the diagram
▶ Check in your browser

Parameters

TypeNameDefaultDescription
General › Condenser
Modelica.Units.SI.TemperatureDifferencedTPin5Pinch temperature at condenser's outlet
Modelica.Units.SI.TemperatureDifferencedTSubCool8Supercooling of working fluid
Modelica.Units.SI.DensitydSec1000Constant density of secondary fluid
Modelica.Units.SI.SpecificHeatCapacitycpSec4.1813e3Constant specific heat capacity of secondary fluid
Modelica.Units.SI.VolumeFlowRateV_flowSec(0.776 + 0.781 + 0.44)/3/3600Constant volume flow of secondary fluid
Assumptions › General
BooleanallowFlowReversalfalse= false to simplify equations, assuming, but not enforcing, no flow reversal

Connectors

TypeNameDefaultDescription
Modelica.Fluid.Interfaces.FluidPort_bport_bFluid connector b (positive design flow direction is from port_a to port_b)
Modelica.Blocks.Interfaces.RealInputinpQ_flowHeat capacity
Modelica.Blocks.Interfaces.RealInputinpTFloTemperature flow at heat capacity

Components

TypeNameDefaultDescription
Modelica.Blocks.Sources.RealExpressioninlPCondExpressions describing saturation pressure at condenser's inlet
Modelica.Blocks.Sources.RealExpressioninlTConExpressions describing temperature at condenser's inlet
AixLib.Fluid.Sources.Boundary_pTsinkSource with constant pressure and temperature
AixLib.Fluid.Sensors.SpecificEnthalpyTwoPortsenSpeEntSensor that measures current specific enthalpy
AixLib.Fluid.Sensors.MassFlowRatesenMasFloSensor that measures current mas flow rate
Medium.SaturationPropertiessatConSaturation properties of the condenser's working fluid
Medium.ThermodynamicStatestaOutThermodynamic state of the working fluid at condenser's outlet
Modelica.Units.SI.AbsolutePressurepSatAbsolute pressure at condenser's outlet
Modelica.Units.SI.TemperatureTSatSaturation temperature
Modelica.Units.SI.TemperatureTOutTemperature at condenser's outlet
Modelica.Units.SI.SpecificEnthalpyhOutSpecific enthalpy at condenser's outlet
Modelica.Units.SI.MassFlowRatem_flowMass flow rate
Modelica.Units.SI.HeatFlowRateQ_flowHeat capacity
Modelica.Units.SI.MassFlowRatem_flowSecMass flow rate of secondary fluid
Modelica.Units.SI.TemperatureTFloTemperature flow at heat capacity
Modelica.Units.SI.TemperatureTRetFloTemperature return flow at heat capacity

Contents

NameDescription
Medium