Model that demonstrates use of a heat exchanger without condensation that uses the epsilon-NTU relation with feedback control
This model demonstrates the use of
AixLib.Fluid.HeatExchangers.DryCoilEffectivenessNTU.
The valve on the water-side is regulated to track a setpoint temperature
for the air outlet.
Contents
| Name | Description |
|---|
| Medium1 | Medium model for water |
| Medium2 | Medium model for air |
-
December 22, 2014 by Michael Wetter:
Removed Modelica.Fluid.System
to address issue
#311.
-
July 3, 2014, by Michael Wetter:
Changed pressure sink to mass flow rate sink to avoid an overdetermined
by consistent set of initial conditions.
-
March 1, 2013, by Michael Wetter:
Added nominal pressure drop for valve as
this parameter no longer has a default value.
Generated at 2025-11-23T19:14:11Z
by OpenModelicaOpenModelica 1.25.6 using GenerateDoc.mos