.AixLib.Fluid.HeatPumps.Examples.ScrollWaterToWater_OneRoomRadiator

Information

Example that simulates one room equipped with a radiator. Hot water is produced by a 24 kW nominal capacity heat pump. The source side water temperature to the heat pump is constant at 10°C.

The heat pump is turned on when the room temperature falls below 19°C and turned off when the room temperature rises above 21°C.

Contents

Name	Description
MediumA	Medium model for air
MediumW	Medium model for water

Revisions

• July 22, 2021, by Michael Wetter:
  Removed assignments pumHeaPum(y_start=1) and pumHeaPumSou(y_start=1).
  This is for #1498.
• April 21, 2021, by Michael Wetter:
  Corrected error in calculation of design mass flow rate.
  This is for #2458.
• May 2, 2019, by Jianjun Hu:
  Replaced fluid source. This is for #1072.
• March 3, 2017, by Michael Wetter:
  Changed mass flow test to use a hysteresis as a threshold test can cause chattering.
• January 27, 2017, by Massimo Cimmino:
  First implementation.