.AixLib.Fluid.Movers.Compressors.UsersGuide.References .AixLib.Fluid.Movers.Compressors.UsersGuide.ReferencesIn the following, the literature used for the compressor library is summarised.
W. Eifler, E. Schlücker, U. Spicher and G. Will (2009): Küttner Kolbenmaschinen: Kolbenpumpen, Kolbenverdichter, Brennkraftmaschinen (in German). Publisher: Vieweg + Teubner
H. Qiao, R. Radermacher and V. Aute (2010): A review for numerical simulation of vapor compression systems. In: International Refrigeration and Air Conditioning Conference
P.C. Hanlon (2011): Compressor Handbook. Publisher: McGraw-Hill
V. A. Cara Martin and R. Radermacher (2015): AHRI Project 8013: A Study of Methods to Represent Compressor Performance Data over an Operating Envelope Based on a Finite Set of Test Data. Publisher: Air-Conditioning, Heating, and Refrigeration Institute (AHRI)
I.D. Jähnig, D. Reindl and S.A. Klein, S. A. (2000): Semi-empirical method for representing domestic refrigerator/freezer compressor calorimeter test data.
M.-E Duprez, E. Dumont and M. Frère (2007): Modelling of reciprocating and scroll compressors. In: International Journal of Refrigeration 30(5), S. 873–886
E. Kinab, D. Marchio, P. Rivière and A. Zoughaib (2010): Reversible heat pump model for seasonal performance optimization. In: Energy and Buildings 42(12), S. 2269–2280
J.M. Mendoza-Miranda, A. Mota-Babiloni, J.J. Ramírez-Minguela, V.D. Muñoz-Carpio, M. Carrera-Rodríguez, J. Navarro-Esbrí and C. Salazar-Hernández (2016): Comparative evaluation of R1234yf, R1234ze(E) and R450A as alternatives to R134a in a variable speed reciprocating compressor. In: Energy 114, S. 753–766
M. Engelpracht (2017): Development of modular and scalable simulation models for heat pumps and chillers considering various refrigerants. Master Thesis
J.H. Darr and R.R. Crawford (1992): Modeling of an Automotive Air Conditioning Compressor Based on Experimental Data: ACRC Technical Report 14. Publisher: Air Conditioning and Refrigeration Center. College of Engineering. University of Illinois at Urbana-Champaign.
F. Karlsson (2007): Capacity Control of Residential Heat Pump Heating Systems. In: PhD thesis
R. Zhou, T. Zhang, J. Catano, J.T. Wen, G.J. Michna, Y. Peles, and M.K. Jensen, M. K. (2010): The steady-state modeling and optimization of a refrigeration system for high heat flux removal. In: Applied Thermal Engineering 30(16), S. 2347–2356
E. Kinab, D. Marchio, P. Rivière and A. Zoughaib (2010): Reversible heat pump model for seasonal performance optimization. In: Energy and Buildings 42(12), S. 2269–2280
W. Li (2013): Simplified steady-state modeling for variable speed compressor. In: Applied Thermal Engineering 50(1), S. 318–326
J.M. Mendoza-Miranda, A. Mota-Babiloni, J.J. Ramírez-Minguela, V.D. Muñoz-Carpio, M. Carrera-Rodríguez, J. Navarro-Esbrí and C. Salazar-Hernández (2016): Comparative evaluation of R1234yf, R1234ze(E) and R450A as alternatives to R134a in a variable speed reciprocating compressor. In: Energy 114, S. 753–766
Q. Hongtao, C.R. Laughman, D.J. Burns and S.A. Bortoff, (2017): Dynamic Characteristics of an R-410A Multi-split Variable Refrigerant Flow Air-conditioning System. In: IEA Heat Pump Conference 2017
D. Körner (2017): Development of dynamic compression heat pump models to evaluate promising refrigerants considering legal regulations. Master Thesis
M. Engelpracht (2017): Development of modular and scalable simulation models for heat pumps and chillers considering various refrigerants. Master Thesis
J.H. Darr and R.R. Crawford (1992): Modeling of an Automotive Air Conditioning Compressor Based on Experimental Data: ACRC Technical Report 14. Publisher: Air Conditioning and Refrigeration Center. College of Engineering. University of Illinois at Urbana-Champaign.
F. Karlsson (2007): Capacity Control of Residential Heat Pump Heating Systems. In: PhD thesis
J.M. Mendoza-Miranda, A. Mota-Babiloni, J.J. Ramírez-Minguela, V.D. Muñoz-Carpio, M. Carrera-Rodríguez, J. Navarro-Esbrí and C. Salazar-Hernández (2016): Comparative evaluation of R1234yf, R1234ze(E) and R450A as alternatives to R134a in a variable speed reciprocating compressor. In: Energy 114, S. 753–766
M. Engelpracht (2017): Development of modular and scalable simulation models for heat pumps and chillers considering various refrigerants. Master Thesis