modelStaticEvaporator
Static evaporator assuming constant pinch point at evaporator's outlet
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| General › Evaporator | |||
| Modelica.Units.SI.TemperatureDifference | dTPin | 5 | Pinch temperature at evaporator's outlet |
| Modelica.Units.SI.TemperatureDifference | dTSupHea | 1 | Superheating of working fluid |
| Assumptions › General | |||
| Boolean | allowFlowReversal | false | = false to simplify equations, assuming, but not enforcing, no flow reversal |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Fluid.Interfaces.FluidPort_b | port_b | Fluid connector b (positive design flow direction is from port_a to port_b) | |
| Modelica.Blocks.Interfaces.RealInput | inpTAmb | Input of ambient temperature |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Sources.RealExpression | outPEva | Expressions describing saturation pressure at evaporator's outlet | |
| Modelica.Blocks.Sources.RealExpression | outTEva | Expressions describing temperature at evaporator's outlet | |
| Sources.Boundary_pT | source | Source with constant pressure and temperature | |
| Medium.SaturationProperties | satEva | Saturation properties of the evaporator's working fluid | |
| Medium.ThermodynamicState | staOut | Thermodynamic state of the working fluid at evaporator's outlet | |
| Modelica.Units.SI.AbsolutePressure | pSat | Absolute pressure at evaporator's outlet | |
| Modelica.Units.SI.Temperature | TSat | Saturation temperature | |
| Modelica.Units.SI.Temperature | TOut | Temperature at evaporator's outlet | |
| Modelica.Units.SI.Temperature | TAmb | Temperature of ambient |
Contents
| Name | Description |
|---|---|
 Medium |