modelDpConst
Extends from Modelica.Icons.Example (Icon for runnable examples).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | 1.0 | Nominal mass flow rate |
| Modelica.Units.SI.MassFlowRate | m_flow_nominal_max | 2*m_flow_nominal | To describe max point of mover's characteristic curve. |
| Modelica.Units.SI.PressureDifference | dp_nominal | 100000 | Nominal pressure raise, used to normalized the filter if use_inputFilter=true, to set default values of constantHead and heads, and and for default pressure curve if not specified in record per |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealOutput | elEnergy | Cumulated electrical power |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| AixLib.Fluid.Sources.Boundary_pT | sou | ||
| AixLib.Fluid.Actuators.Valves.TwoWayLinear | val | Pressure drop | |
| AixLib.Fluid.Sensors.MassFlowRate | masFloRat | ||
| AixLib.Fluid.Movers.DpControlledMovers.DpControlled_dp | dpControlled_dp | ||
| AixLib.Fluid.FixedResistances.PressureDrop | dp | Pressure drop | |
| Modelica.Blocks.Sources.Ramp | rampValve | ||
| AixLib.Fluid.Delays.DelayFirstOrder | vol | ||
| Modelica.Thermal.HeatTransfer.Sources.FixedTemperature | fixedTemperature | ||
| Modelica.Blocks.Continuous.Integrator | integrator |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |