modelAirFlowMoistureToROM
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nPools | 1 | |
| Modelica.Units.SI.MassFlowRate | m_flow_air_nominal | 1 | air flow rate between swimming hall and air layer above swimming pool |
| Modelica.Units.SI.Volume | VAirLay | 7500 | volume of air layer above pool for mass exchange due to evaporation |
| Dynamics › Equations | |||
| Modelica.Fluid.Types.Dynamics | energyDynamics | Modelica.Fluid.Types.Dynamics.SteadyState | Type of energy balance: dynamic (3 initialization options) or steady state |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput[nPools] | QEva | Heat due to evaporation | |
| Modelica.Blocks.Interfaces.RealInput[nPools] | m_flow_eva | Water mass flow due to evaporation | |
| Modelica.Fluid.Interfaces.FluidPort_a | port_a | Fluid connector a (positive design flow direction is from port_a to port_b) | |
| Modelica.Fluid.Interfaces.FluidPort_b | port_b | Fluid connector a (positive design flow direction is from port_a to port_b) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| MixingVolumes.MixingVolumeMoistAir | AirLay | Air layer above swimming pool, relevant for evaporation | |
| Movers.FlowControlled_m_flow | sou | ||
| Modelica.Blocks.Math.MultiSum | Sum_m_flow_eva | ||
| Modelica.Blocks.Math.MultiSum | SumQEva | ||
| Modelica.Blocks.Sources.RealExpression | mAirExc | Set point for water mass fraction | |
| Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow | prescribedHeatFlow |
Contents
| Name | Description |
|---|---|
 AirMedium | Medium in the component |