modelHeatTransferConduction
Heat transfer due to conduction through pool walls
Information
This model is a base model to calculate the heat transfer through pool walls. The pool walls are divided in: vertical walls without earth contact, vertical walls with earth contact, pool floor without earth contact, pool floor with earth contact.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Area | AWalInt | Area of pool walls which is connected to inner rooms (inner pool walls) | |
| Modelica.Units.SI.Area | AWalExt | Area of pool walls which is connected to the ground (pool wall with earth contact) | |
| Modelica.Units.SI.Area | AFloInt | Area of pool floors which is connected to inner rooms (inner pool floor) | |
| Modelica.Units.SI.Area | AFloExt | Area of pool floors which is connected to teh ground (pool floor with earth contact) | |
| Modelica.Units.SI.CoefficientOfHeatTransfer | hConWaterHorizontal | Mean value for the heat transfer coefficient of free convection on horizontal pool floors | |
| Modelica.Units.SI.CoefficientOfHeatTransfer | hConWaterVertical | Mean value for the heat transfer coefficient of free convection on vertical pool walls | |
| Modelica.Units.SI.Temperature | TPool | Set temperature for pool | |
| AixLib.DataBase.Walls.WallBaseDataDefinition | PoolWall | Wall type for pool walls, record contains all wall layers | |
| Dynamics › Equations | |||
| Modelica.Fluid.Types.Dynamics | energyDynamics | Modelica.Fluid.Types.Dynamics.SteadyState | Type of energy balance: dynamic (3 initialization options) or steady state |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a | heatport_a | Inlet for heattransfer | |
| Modelica.Blocks.Interfaces.RealInput | TSoil | Temperature of Soil |