Example to demonstrate the function of the solar thermal collector model
Overview
This test demonstrates the solar thermal collector model. Different
types of collectors can be tested at fixed boundary conditions.
-
January 7, 2018 by Peter Matthes:
Removes m_flow_nominal parameter.
Add Modelica.Fluid.System to example.
Set proper volume flow rate (3 l/min).
Calculate source pressure depending on volume flow rate and pipe
pressure loss.
Set start values in most components.
Add plot script and simulation command.
-
October 25, 2017 by Philipp Mehrfeld:
Use AixLib.Media.Water
-
December 15, 2016 by Moritz Lauster:
Moved
-
October 11, 2016 by Marcus Fuchs:
Replace pipe
-
April 2016 by Peter Remmen:
Replace TempAndRad model
-
November 2014 by Marcus Fuchs:
Changed model to use Annex 60 base class
-
November 2013 by Marcus Fuchs:
Implemented
Contents
Name | Description |
---|
Medium | Medium model |
Generated at 2025-04-05T18:20:13Z
by OpenModelicaOpenModelica 1.25.0 using GenerateDoc.mos