.AixLib.Media.Refrigerants.Validation.RefrigerantInversions

Information

This example models checks the calculation of the refrigerant's main inversions depending on the independent variables pressure and temperature. Therefore, the user has first to introduce some information about the refrigerant and afterwards the different inversions are calculated. The following refrigerant's information is required:

1. The refrigerant package that shall be tested.
2. The refrigerant's fluid limits that are determined by the fitting procedure.

The following inversions are calculated and checked:

1. Temperature calculated with pressure and specific enthalpy.
2. Temperature calculated with pressure and specific entropy.
3. Pressure calculated with density and temperature.
4. Density calculated with pressure and specific enthalpy.
5. Density calculated with pressure and specific entropy.
6. Specific enthalpy calculated with density and temperature.
7. Specific enthalpy calculated with pressure and specific entropy.

Contents

Revisions

• June 14, 2017, by Mirko Engelpracht, Christian Vering:
  First implementation (see issue 408).