modelFluidAdaptorFlow
Fluid adaptor, flow as output
Information
This model is typically used to convert a fluid port to input / output connectors.
Options:
- use_T_in - Determines whether the temperature is an input or output to the adaptor. Typically temperature information should come from the direction of the flow.
- Medium - The working fluid, defaulting to air.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | use_T_in | true | Use temperature from design direction |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | m_flow_in | Prescribed mass flow rate | |
| Modelica.Blocks.Interfaces.RealInput | T_in | Prescribed boundary temperature | |
| Modelica.Blocks.Interfaces.RealOutput | p_out | Prescribed boundary pressure | |
| Modelica.Fluid.Interfaces.FluidPort_b | port_b | ||
| Modelica.Blocks.Interfaces.RealOutput | T_out | Prescribed boundary temperature |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Fluid.Sources.MassFlowSource_T | boundary | ||
| Buildings.Fluid.Sensors.Pressure | senPre | ||
| Buildings.Fluid.Sensors.Temperature | senTem |
Contents
| Name | Description |
|---|---|
 Medium |