recordboundary_rec

Parameters

TypeNameDefaultDescription
IntegernPorts1Number of ports
BooleanverifyInputsfalseSet to true to stop the simulation with an error if the medium temperature is outside its allowable range
Modelica.Fluid.Types.PortFlowDirectionflowDirectionModelica.Fluid.Types.PortFlowDirection.BidirectionalAllowed flow direction
Booleanuse_X_infalseGet the composition (all fractions) from the input connector
Booleanuse_Xi_infalseGet the composition (independent fractions) from the input connector
Booleanuse_C_infalseGet the trace substances from the input connector
Real'X[1]'0.01Fixed value of composition
Real'X[2]'0.99Fixed value of composition
Booleanuse_m_flow_intrueGet the mass flow rate from the input connector
Modelica.Units.SI.MassFlowRatem_flow0Fixed mass flow rate going out of the fluid port
Booleanuse_T_intrueGet the temperature from the input connector
RealT293.15Fixed value of temperature

Components

TypeNameDefaultDescription
importedFMUTypes.Modelica_Blocks_Interfaces_RealInputp_in_internalNeeded to connect to conditional connector
importedFMUTypes.Modelica_Blocks_Interfaces_RealInput'Xi_in_internal[1]'Needed to connect to conditional connector
importedFMUTypes.Modelica_Blocks_Interfaces_RealInput'X_in_internal[1]'Needed to connect to conditional connector
importedFMUTypes.Modelica_Blocks_Interfaces_RealInput'X_in_internal[2]'Needed to connect to conditional connector
importedFMUTypes.Modelica_Blocks_Interfaces_RealInputm_flow_inPrescribed mass flow rate
importedFMUTypes.Modelica_Blocks_Interfaces_RealInputm_flow_in_internalNeeded to connect to conditional connector
importedFMUTypes.Modelica_Blocks_Interfaces_RealInputT_in_internalNeeded to connect to conditional connector
importedFMUTypes.Modelica_Blocks_Interfaces_RealInputh_internalInternal connector for enthalpy
importedFMUTypes.Modelica_Blocks_Interfaces_RealInputT_inPrescribed boundary temperature
'ports[1]_rec''ports[1]'

Contents

NameDescription
'ports[1]_rec'protected