modelVCV
Linear voltage-controlled voltage source
Extends from Interfaces.TwoPort (TwoPort partial model of analog electrical library).
Information
The linear voltage-controlled voltage source is built in bondgraphic technology using an effort detector and a modulated effort source. A-causal bonds must partially be used here, because the causality of the output port depends on the embedding of the VCV element in its environment.
Parameters: gain: Voltage gain (default value = 1)
Equations:
v2 = gain*v1
i1 = 0
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | gain | 1 | Voltage gain |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.Voltage | v1 (from TwoPort) | Voltage drop over the left port | |
| Modelica.SIunits.Voltage | v2 (from TwoPort) | Voltage drop over the right port | |
| Modelica.SIunits.Current | i1 (from TwoPort) | Current flowing from pos. to neg. pin of the left port | |
| Modelica.SIunits.Current | i2 (from TwoPort) | Current flowing from pos. to neg. pin of the right port | |
| Modelica.Electrical.Analog.Interfaces.PositivePin | p1 (from TwoPort) | First left electrical connector | |
| Modelica.Electrical.Analog.Interfaces.PositivePin | p2 (from TwoPort) | Second left electrical connector | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | n1 (from TwoPort) | First right electrical connector | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | n2 (from TwoPort) | Second right electrical connector |