The ideal leaking electrical closing switch is built in bondgraphic technology from a bond graph Sw2 element, a 1-junction, and three bonds. A-causal bonds must be used here, because the causality depends on the embedding of the switch in its environment. A leaking switch has been used to ensure that the switch will not lead to a division by zero in either switch position, irrespective of the circuit topology.
The logic is such that the switch is considered closed, when the Boolean control signal assumes a value of true.
Parameters:
Ron: Leakage resistance in on state (default value = 1e-5 Ohm)
Goff: Leakage conductance in off state (default value = 1e-5 Mho)
Generated at 2024-12-27T19:26:12Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos
.BondLib.Electrical.Analog.Ideal.IdealClosingSwitch