modelIdealGyrator
Ideal linear gyrator of analog electrical library
Extends from Interfaces.TwoPort (TwoPort partial model of analog electrical library).
Information
The ideal gyrator is built in bondgraphic technology from a bond graph GY elements. A-causal bonds must be used here, because the causality depends on the embedding of the gyrator in its environment.
Parameters: r: Gyration constant (default value = 1)
Equations:
v1 = r*i2
v2 = -r*i1
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.Conductance | G | 1 | Gyration conductance |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.Voltage | v1 (from TwoPort) | Voltage drop over the left port | |
| Modelica.SIunits.Voltage | v2 (from TwoPort) | Voltage drop over the right port | |
| Modelica.SIunits.Current | i1 (from TwoPort) | Current flowing from pos. to neg. pin of the left port | |
| Modelica.SIunits.Current | i2 (from TwoPort) | Current flowing from pos. to neg. pin of the right port | |
| Modelica.Electrical.Analog.Interfaces.PositivePin | p1 (from TwoPort) | First left electrical connector | |
| Modelica.Electrical.Analog.Interfaces.PositivePin | p2 (from TwoPort) | Second left electrical connector | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | n1 (from TwoPort) | First right electrical connector | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | n2 (from TwoPort) | Second right electrical connector |