modelHeatingDiode
Real heating diode of the analog electrical library
Extends from Interfaces.OnePort (OnePort partial model of analog electrical library).
Information
The real electrical heating diode is built in bondgraphic technology from a bond graph DSreal element. A-causal bonds must be used here, because the causality depends on the embedding of the diode in its environment.
Parameters: Ids: Saturation current (default value = 1e-6 Amp) Maxexp: Maximum exponent (default value = 15) R: Parallel Ohmic leakage resistance (default value = 1e8 Ohm) EG: Activation energy (default value = 1.11 J) N: Emission coefficient (default value = 1) TNOM: Nominal temperature (default value = 300.15 K) XTI: Temperature exponent of saturation current (default value = 3)
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.Current | Ids | 1.e-6 | Saturation current |
| Real | EG | 1.11 | activation energy |
| Real | N | 1 | Emission coefficient |
| Modelica.SIunits.Temperature | TNOM | 300.15 | Nominal temperature |
| Real | XTI | 3 | Temperature exponent of saturation current |
| Real | Maxexp | 15 | Max. exponent for linear continuation |
| Modelica.SIunits.Resistance | R | 1.e8 | Parallel Ohmic resistance |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Electrical.Analog.Interfaces.PositivePin | p (from OnePort) | Left electrical connector | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | n (from OnePort) | Right electrical connector | |
| Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a | heatPort | Thermal connector |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.Voltage | v (from OnePort) | Voltage drop between the two pins | |
| Modelica.SIunits.Current | i (from OnePort) | Current flowing from pin p to pin n |