The step response voltage source is built in bondgraphic technology from a bond graph expSe element, a 1-junction, and three bonds. A-causal bonds must be used except at the source, because the causality depends on the embedding of the voltage source in its environment.
Parameters:
V: Height of step response source voltage after infinite time (default value = 1 Volt)
riseTime: Rise time of step response to be generated (default value = 0.5 sec)
riseTimeConst: Rise time constant of step response to be generated (default value = 0.1)
fallTimeConst: Fall time constant of step response to be generated (default value = riseTimeConst)
offset: Offset of step response to be generated (default value = 0 Volt)
startTime: Start time of step response to be generated (default value = 0 sec)
Generated at 2024-05-17T18:15:58Z
by OpenModelicaOpenModelica 1.22.4 using GenerateDoc.mos