modelSawToothCurrent
Saw tooth current source of analog electrical library
Extends from Interfaces.OnePort (OnePort partial model of analog electrical library).
Information
The saw tooth current source is built in bondgraphic technology from a bond graph sawSf element, a 1-junction, and three bonds. A-causal bonds must be used except at the source, because the causality depends on the embedding of the current source in its environment.
Parameters: I: Amplitude of source current saw tooth (default value = 1 Amp) period: Length of period of saw tooth to be generated (default value = 1 sec) offset: Offset of saw tooth to be generated (default value = 0 Amp) startTime: Start time of saw tooth to be generated (default value = 0 sec)
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.Current | I | 1 | Amplitude of saw tooth |
| Modelica.SIunits.Time | period | 1 | Time for one period |
| Modelica.SIunits.Current | offset | 0 | Current offset |
| Modelica.SIunits.Time | startTime | 0 | Time offset |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Electrical.Analog.Interfaces.PositivePin | p (from OnePort) | Left electrical connector | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | n (from OnePort) | Right electrical connector |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.Voltage | v (from OnePort) | Voltage drop between the two pins | |
| Modelica.SIunits.Current | i (from OnePort) | Current flowing from pin p to pin n |