blockIB0
Non-linear base-emitter current source of the Ebers-Moll BJT
Extends from Modelica.Blocks.Interfaces.SI2SO (2 Single Input / 1 Single Output continuous control block).
Information
This block computes the injected base current of a BJT in accordance with the Ebers-Moll model.
Parameters: Bf: Forward beta coefficient (default value = 50) Br: Reverse beta coefficient (default value = 0.1)
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | Bf | 50 | Forward beta coefficient |
| Real | Br | 0.1 | Reverse beta coefficient |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| RealInput | u1 (from SI2SO) | Connector of Real input signal 1 | |
| RealInput | u2 (from SI2SO) | Connector of Real input signal 2 | |
| RealOutput | y (from SI2SO) | Connector of Real output signal |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.Current | ibc | Base-collector diode current | |
| Modelica.SIunits.Current | ibe | Base-emitter diode current | |
| Modelica.SIunits.Current | IB0 | Injected base current |