blockIC02
Non-linear collector-emitter current source of the Ebers-Moll BJT with thermal variation
Extends from Modelica.Blocks.Interfaces.SI2SO (2 Single Input / 1 Single Output continuous control block).
Information
This block computes the injected collector current of a BJT with temperature variation in accordance with the Ebers-Moll model.
Parameters: Br: Reverse beta coefficient (default value = 0.1) Vak: Inverse early voltage (default value = 0.02 /Volt) XTB: Forward and reverse beta temperature coefficient (default value = 0)
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.Temperature | Tnom | 300.15 | Reference temperature |
| Real | Br | 0.1 | Reverse beta coefficient |
| Modelica.SIunits.InversePotential | Vak | 0.02 | Inverse early voltage |
| Real | XTB | 0 | Forward and reverse beta temperature coefficient |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| RealInput | u1 (from SI2SO) | Connector of Real input signal 1 | |
| RealInput | u2 (from SI2SO) | Connector of Real input signal 2 | |
| RealOutput | y (from SI2SO) | Connector of Real output signal | |
| Modelica.Blocks.Interfaces.RealInput | Tdev | Device temperature | |
| Modelica.Blocks.Interfaces.RealInput | u3 | Connector of Real input signal 3 |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.Current | ibc | Base-collector diode current | |
| Modelica.SIunits.Current | ibe | Base-emitter diode current | |
| Modelica.SIunits.Voltage | vbc | Base-collector voltage | |
| Modelica.SIunits.Current | IC0 | Injected collector current |