modelDELAY3
Third-order exponential mass delay
Information
This is a third-order exponential delaying function. It describes the delaying of mass flows.Incoming goods are delayed temporarily in three consecutive internal states. The state output represents the amount of goods currently stored in the DELAY block.
The initial number of items in the DELAY block can be set. By default, it assumes a value of zero.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | averaging_time | 1 | Averaging time |
| Real | delay_init | 0 | Initial value of delayed variable |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealOutput | state | State signal | |
| BondLib.Interfaces.BondCon | BondCon1 | Mass and power inflow | |
| BondLib.Interfaces.BondCon | BondCon2 | Mass and power inflow |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Levels.Level | Level1 | ||
| Rates.Rate_1 | Rate1 | ||
| Auxiliary.Gain | Delaying1 | ||
| Levels.Level | Level2 | ||
| Rates.Rate_1 | Rate2 | ||
| Auxiliary.Gain | Delaying2 | ||
| Levels.Level | Level3 | ||
| Rates.Rate_1 | Rate3 | ||
| Auxiliary.Gain | Delaying3 | ||
| Auxiliary.Add_3 | Add1 |