.Buildings.Controls.OBC.CDL.Reals.Sort

Information

Block that sorts the elements of the input signal u. If the parameter ascending = true, then the output signal satisfies y_i <= y_i+1 for all i ∈ {1, ..., n-1}. Otherwise, it satisfies y_i >= y_i+1 for all i ∈ {1, ..., n-1}.

Usage

Note that this block shall only be used for input signals u that are time sampled.
Otherwise, in simulation, numerical noise from a nonlinear solver or from an implicit time integration algorithm may cause the simulation to stall. Numerical noise can be present if an input depends on a state variable or a quantity that requires an iterative solution, such as a temperature or a mass flow rate of an HVAC system.
In real controllers, measurement noise may cause the output to change frequently.

This block may for example be used in a variable air volume flow controller to access the position of the dampers that are most open.

Revisions

• March 2, 2020, by Michael Wetter:
  Changed icon to display dynamically the output value.
• September 22, 2017, by Michael Wetter:
  Reimplemented function to make it work with OpenModelica.
• September 14, 2017, by Jianjun Hu:
  Changed model name.
• January 10, 2017, by Milica Grahovac:
  Initial CDL implementation.
• November 21, 2011, by Michael Wetter:
  Removed assert statement.
• November 25, 2008, by Michael Wetter:
  First implementation.