Example of series connection with variable district water mass flow rate with updated agent controller
This model is an updated version of
Buildings.DHC.Examples.Combined.SeriesVariableFlow.
In particular the following have been updated:
-
The sewage water temperature, mass flow rate and ground temperature are not constant and instead have a seasonal yearly profile.
-
The distribution network pripes now use the plug-flow model to add transport delay and ground coupling to the distribution network.
-
The borefield and sewagre heat exchanger circulation pumps are controlled by an agent specific controller
Buildings.DHC.Networks.Controls.AgentPump1Pipe.
References
Ettore Zanetti, David Blum, Michael Wetter (2023)
Control development and sizing analysis for a 5th generation district heating and cooling network using Modelica,
In Proceedings of the 15th International Modelica Conference. Aachen, Germany, Oct 9-11, 2023.
-
January 20, 2023, by Ettore Zanetti:
First implementation.
Generated at 2025-04-25T18:20:13Z
by OpenModelicaOpenModelica 1.25.0 using GenerateDoc.mos
.Buildings.DHC.Examples.Combined.SeriesVariableFlowAgentControl