.Buildings.DHC.Networks.BaseClasses.PartialDistribution2Pipe2Medium

Information

Partial model of a two-pipe distribution network.

An array of replaceable partial models is used to represent the connections along the network, including the pipe segment immediately upstream each connection.

A replaceable partial model is used to represent the pipe segment of the supply and return line after the last connection.

The parameter iConDpSen is provided to specify the index of the connection where the pressure drop is measured. Use zero for a sensor connected to the supply pipe inlet and return pipe outlet. Use a negative value if no sensor is needed.

Optionally the heat flow rate transferred to each connected load can be output.

Contents

Name	Description
Model_pipDis	Model for distribution pipe

Revisions

• March 2, 2022, by Antoine Gautier and Kathryn Hinkelman:
  First implementation.