.Buildings.Electrical.AC.OnePhase.Lines.Examples.ACLine_L .Buildings.Electrical.AC.OnePhase.Lines.Examples.ACLine_LThis example demonstrates how to use a purely inductive line model to connect a source to a load.
The model has four different loads. The load
sc_load represents a short circuit R=0. The
current that flows through the load depends on the inductance of
the line.
The remaining three loads R1, R2, and
R3 are resistive loads. Each load is connected to the
source with different configurations, however the equivalent
impedance between each load and the source is the same. Since the
equivalent impedances are the same, each load draw the same
current.