.Buildings.Electrical.AC.ThreePhasesBalanced.Lines.Examples.ACLine_R .Buildings.Electrical.AC.ThreePhasesBalanced.Lines.Examples.ACLine_RThis example demonstrates how to use a resistive line model to connect a source to a load.
The model has four different loads. The load
sc_load represents a short circuit R=0. The
current that flows through the load depends on the resistance of
the line.
The remaining three loads R1, R2, and
R3 are resistive loads. Each load is connected to the
source with different configurations. However, the equivalent
resistance between each load and the source is the same. Since the
equivalent resistances are the same, each load draws the same
current.