Validation model for isolation valve component
This model validates the model
Buildings.Templates.Plants.HeatPumps.Components.ValvesIsolation
for the following configurations.
-
Heating and cooling system with common dedicated primary HW and CHW pumps
and isolation valves at both heat pump inlet and outlet:
component
valIsoCom.
-
Heating-only system with isolation valves at heat pump inlet:
component
valIsoHeaInl.
-
Heating and cooling system with separate dedicated primary HW and CHW pumps
and isolation valves at heat pump inlet:
component
valIsoSep.
In each configuration, two identical heat pumps are represented by fixed
flow resistances (components hp*).
The model uses open loop controls and the simulation allows verifying that design
flow is obtained in each loop and each heat pump when the valves are open.
Contents
| Name | Description |
|---|
| Medium | CHW/HW medium |
-
March 29, 2024, by Antoine Gautier:
First implementation.
Generated at 2025-12-15T19:13:59Z
by OpenModelicaOpenModelica 1.25.7 using GenerateDoc.mos