.Buildings.ThermalZones.Detailed.Constructions.Examples.ExteriorWallWithWindow

Test model for an exterior wall with a window

Information

This model tests the exterior constructions with windows.

September 16, 2021, by Michael Wetter:
Removed assignment of parameter lat as this is now obtained from the weather data reader.
This is for IBPSA, #1477.
February 18, 2020, by Michael Wetter:
Corrected wrong parameter assignment.
This is for #1766.
March 13, 2015, by Michael Wetter:
Changed model for OpenModelica.
April 29, 2013, by Michael Wetter:
Corrected wrong assignment of parameter in instance bouConExt(conMod=...) which was set to an interior instead of an exterior convection model.
June 12, 2013, by Michael Wetter:
Redesigned model to separate convection from radiation, which is required for the implementation of a CFD model. Corrected wrong connection to frame heat transfer. The previous implementation accounted twice for the convective resistance of the frame on the room-side.
May 1, 2013, by Michael Wetter:
Declared the parameter record to be a parameter, as declaring its elements to be parameters does not imply that the whole record has the variability of a parameter.
March 7, 2012, by Michael Wetter:
Updated example to use new data model Buildings.ThermalZones.Detailed.BaseClasses.ParameterConstructionWithWindow in model for boundary conditions.
December 6, 2010, by Michael Wetter:
First implementation.

Generated at 2025-09-10T18:21:07Z by OpenModelicaOpenModelica 1.25.3 using GenerateDoc.mos