.Buildings.ThermalZones.EnergyPlus_9_6_0.Types.Units .Buildings.ThermalZones.EnergyPlus_9_6_0.Types.UnitsEnumeration for the units used as inputs to the block Buildings.ThermalZones.EnergyPlus_9_6_0.Schedule.
The units are converted between Modelica and EnergyPlus as shown in the table below.
Quantity |
EnergyPlus Unit String |
Modelica Unit |
|---|---|---|
Angle (rad) |
rad |
rad |
Angle (deg) |
deg |
rad |
Energy |
J |
J |
Illuminance |
lux |
lm/m2 |
Humidity (absolute) |
kgWater/kgDryAir |
1 (converted to mass fraction per total mass of moist air) |
Humidity (relative) |
% |
1 |
Luminous flux |
lum |
cd.sr |
Mass flow rate |
kg/s |
kg/s |
Power |
W |
W |
Pressure |
Pa |
Pa |
Status (e.g., rain) |
(no character) |
1 |
Temperature |
degC |
K |
Time |
s |
s |
Volume flow rate |
m3/s |
m3/s |
type Units = enumeration(Normalized "Normalized, such as a control signal between 0 and 1 or status 0, 1, 2, ... (1)", AngleRad "Angle (rad)", AngleDeg "Angle (deg)", Energy "Energy (J)", Illuminance "Illuminance", HumidityAbsolute "Absolute humidity (mass fraction per total mass of moist air)", HumidityRelative "Relative humidity (1)", LuminousFlux "Luminous flux (cd.sr)", MassFlowRate "Mass flow rate (kg/s)", Power "Power (W)", Pressure "Pressure (Pa)", Status "Status (e.g., rain) (1)", Temperature "Temperature (K)", Time "Time (s)", VolumeFlowRate "VolumeFlowRate (m3/s)");