.Buildings.ThermalZones.EnergyPlus_9_6_0.UsersGuide.KnownIssues

Information

Known issues

Signals to time schedules and actuators

If Modelica overrides a time schedule or an actuator at a time instant that does not coincide with an EnergyPlus time step, the change in value may be ignored for the heat balance of the current EnergyPlus time step.
This will be addressed through issue 2000.

Simulation must not start at a negative time

If a simulation starts at a time smaller than 0, then an error will be issued and the simulation won't start.
This will be addressed through issue 1938.