Model with interfaces for media with moist air that will be linked to the BCVTB which models the response of the room
This example illustrates the use of Modelica with the Building Controls Virtual Test Bed.
The model represents an air-based heating system with an ideal heater and an ideal humidifier
in the supply duct. The heater and humidifier are controlled with a feedback loop that
tracks the room air temperature and room air humidity. These quantities are simulated
in the EnergyPlus simulation program through the Building Controls Virtual Test Bed.
The component bouBCVTB
models the boundary between the domain that models the air
system (in Modelica) and the room response (in EnergyPlus).
This model is implemented in bcvtb\examples\dymolaEPlusXY-singleZone
,
where XY
denotes the EnergyPlus version number.
Contents
-
December 22, 2014 by Michael Wetter:
Removed Modelica.Fluid.System
to address issue
#311.
-
May 1, 2013, by Michael Wetter:
Removed the medium declaration in the instance
of the model Buildings.Utilities.Psychrometrics.X_pTphi
as
this model no longer allows to replace the medium.
-
January 13, 2012, by Michael Wetter:
Updated fan parameters, which were still for version 0.12 of the
Buildings library and hence caused a translation error with version 1.0 or higher.
-
April 5, 2011, by Michael Wetter:
Changed sensor models from one-port sensors to two port sensors.
-
January 21, 2010 by Michael Wetter:
Changed model to include fan instead of having flow driven by two reservoirs at
different pressure.
-
September 11, 2009, by Michael Wetter:
First implementation.
Generated at 2025-04-01T18:24:36Z
by OpenModelicaOpenModelica 1.24.5 using GenerateDoc.mos