modelPartialAirHandlerControl
Partial model for testing air hanlders with temperature and humidity control
Information
Partial model for testing temperature and humidity control in air handling units.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | m1_flow_nominal | 2.9 | Nominal mass flow rate |
| Modelica.Units.SI.MassFlowRate | m2_flow_nominal | 3.3 | Nominal mass flow rate |
| Modelica.Units.SI.Temperature | T_a1_nominal | 6 + 273.15 | Nominal water inlet temperature |
| Modelica.Units.SI.Temperature | T_b1_nominal | 11 + 273.15 | Nominal water outlet temperature |
| Modelica.Units.SI.Temperature | T_a2_nominal | 26 + 273.15 | Nominal air inlet temperature |
| Modelica.Units.SI.Temperature | T_b2_nominal | 12 + 273.15 | Nominal air outlet temperature |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Fluid.Sources.Boundary_pT | sin_2 | Sink for water | |
| Buildings.Fluid.Sources.Boundary_pT | sou_2 | Source for water | |
| Buildings.Fluid.Sources.Boundary_pT | sin_1 | Sink for air | |
| Buildings.Fluid.Sources.Boundary_pT | sou_1 | Sink for air | |
| Buildings.Fluid.FixedResistances.PressureDrop | res_2 | Flow resistance | |
| Buildings.Fluid.FixedResistances.PressureDrop | res_1 | Flow resistance | |
| Modelica.Blocks.Sources.Constant | TSet | Setpoint temperature | |
| Modelica.Blocks.Sources.Constant | relHum | Relative humidity | |
| Buildings.Utilities.Psychrometrics.X_pTphi | x_pTphi | ||
| Modelica.Blocks.Sources.Constant | temSou_2 | Temperature boundary for source 2 | |
| Modelica.Blocks.Sources.Step | TWat | Water temperature | |
| Buildings.Fluid.Sensors.MassFractionTwoPort | masFra | Sensor for mass fraction | |
| Buildings.Fluid.Sensors.TemperatureTwoPort | temSenWat1 | Temperature sensor for water | |
| Buildings.Fluid.Sensors.TemperatureTwoPort | temSenAir2 | Temperature for air | |
| Buildings.Fluid.Sensors.TemperatureTwoPort | temSenWat2 | Temperature for water |
Contents
| Name | Description |
|---|---|
 Medium1 | Medium model for water |
 Medium2 | Medium model for air |
Revisions
-
May 10, 2017 by Yangyang Fu:
First implementation.