packageValidation
Collection of validation models
Information
This package contains validation models for the classes in Buildings.Controls.OBC.ASHRAE.G36.Plants.Chillers.Staging.SetPoints.Subsequences.
Note that most validation models contain simple input data which may not be realistic, but for which the correct output can be obtained through an analytic solution. The examples plot various outputs, which have been verified against these solutions. These model outputs are stored as reference data and used for continuous validation whenever models in the library change.
Contents
| Name | Description |
|---|---|
 Capacities_u | Validate stage capacities subsequence for chiller stage inputs |
| Capacities_uLow_uHig | Validate stage capacities subsequence for highest and lowest available stage inputs |
| CapacityRequirement | Validates the cooling capacity requirement calculation |
| Change | Validates chiller stage status setpoint signal generation for plants with WSE |
| ChillerIndices_u | Validates extraction of chiller indices in a given stage |
| Configurator_uChiAva | Validate chiller staging configurator subsequence |
| Down | Validate change stage down condition sequence |
| EfficiencyCondition | Validate efficiency condition sequence |
| FailsafeCondition | Validate failsafe condition sequence |
| Initial_WSE | Validate initial stage sequence for a plant with WSE |
| Initial_noWSE | Validate initial stage sequence in case of no WSE |
| PartLoadRatios_u_uTyp | Validates the operating and stage part load ratios calculation for chiller stage and stage type inputs |
| Status_u_uAva | Validates chiller stage status subsequence |
| Up | Validate change stage up condition sequence |