modelSwitchBox
Validation of flow switch box
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
This model validates that Buildings.DHC.ETS.Combined.Subsystems.SwitchBox maintains a positive flow rate in the district line outside of the temporization period set by the controller.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | 1 | Nominal water mass flow rate |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Fluid.Delays.DelayFirstOrder | volSup | Mixing volume supply | |
| Fluid.Delays.DelayFirstOrder | volRet | Mixing volume return | |
| Buildings.DHC.ETS.BaseClasses.Pump_m_flow | pum1 | Chilled water HX secondary pump | |
| Buildings.DHC.ETS.BaseClasses.Pump_m_flow | pum2 | Chilled water HX secondary pump | |
| Buildings.DHC.ETS.Combined.Subsystems.SwitchBox | floSwiBox | Flow switch box | |
| Fluid.Sensors.MassFlowRate | senMasFlo | District water mass flow rate | |
| Buildings.Controls.OBC.CDL.Reals.Sources.Constant | setMasFlo1 | Set point for mass flow rate (normalized) | |
| Fluid.Sources.Boundary_pT | disWatBou | District water boundary conditions | |
| Modelica.Blocks.Sources.CombiTimeTable | setMasFlo2 | Set point for mass flow rate (normalized) | |
| Buildings.Controls.OBC.CDL.Reals.MultiplyByParameter | gai2 | Scale with nominal mass flow rate | |
| Buildings.Controls.OBC.CDL.Reals.MultiplyByParameter | gai1 | Scale with nominal mass flow rate |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |