modelBuilding
Dummy building model for validation purposes
Extends from Buildings.DHC.Loads.BaseClasses.PartialBuilding (Partial class for building model).
Information
This is a minimum example of a class extending Buildings.DHC.Loads.BaseClasses.PartialBuilding developed for testing purposes only.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nPorts_aHeaWat (from PartialBuilding) | 0 | Number of heating water inlet ports |
| Integer | nPorts_bHeaWat (from PartialBuilding) | 0 | Number of heating water outlet ports |
| Integer | nPorts_aChiWat (from PartialBuilding) | 0 | Number of chilled water inlet ports |
| Integer | nPorts_bChiWat (from PartialBuilding) | 0 | Number of chilled water outlet ports |
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | Nominal mass flow rate | |
| Configuration | |||
| Boolean | have_heaWat (from PartialBuilding) | false | Set to true if the building has heating water system |
| Boolean | have_chiWat (from PartialBuilding) | false | Set to true if the building has chilled water system |
| Boolean | have_eleHea (from PartialBuilding) | false | Set to true if the building has decentralized electric heating system |
| Boolean | have_eleCoo (from PartialBuilding) | false | Set to true if the building has decentralized electric cooling system |
| Boolean | have_fan (from PartialBuilding) | false | Set to true if fan power is computed |
| Boolean | have_pum (from PartialBuilding) | false | Set to true if pump power is computed |
| Boolean | have_weaBus (from PartialBuilding) | false | Set to true to use a weather bus |
| Boolean | have_heaLoa (from PartialBuilding) | have_heaWat or have_eleHea | Set to true if the building has heating loads |
| Boolean | have_cooLoa (from PartialBuilding) | have_chiWat or have_eleCoo | Set to true if the building has cooling loads |
| Scaling | |||
| Real | facMul (from PartialBuilding) | 1 | Multiplier factor |
| Assumptions | |||
| Boolean | allowFlowReversal (from PartialBuilding) | false | = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
| Nominal condition | |||
| Modelica.Units.SI.HeatFlowRate | QChiWat_flow_nominal | Design heat flow rate for chilled water production (<0) | |
| Modelica.Units.SI.HeatFlowRate | QHeaWat_flow_nominal | Design heat flow rate for heating water production (>0) | |
Connectors
Components
Revisions
-
December 14, 2020, by Antoine Gautier:
First implementation.