modelBuildingTimeSeriesWithETS
Example model of a building in an ambient district network with loads provided as time series and heat pump heating, free cooling, and heat pump domestic hot water
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
Example model of a building in an ambient district network with loads provided as time series and heat pump heating, free cooling, and heat pump domestic hot water. It uses Buildings.DHC.Loads.Combined.BuildingTimeSeriesWithETS
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Fluid.Sources.Boundary_pT | supAmbWat | Ambient water supply | |
| Buildings.Fluid.Sources.Boundary_pT | sinAmbWat | Sink for ambient water | |
| Buildings.Fluid.Sensors.MassFlowRate | senMasFlo | Mass flow rate sensor | |
| Modelica.Blocks.Sources.Constant | TDisSup | District supply temperature | |
| Buildings.DHC.Loads.Combined.BuildingTimeSeriesWithETS | bui | ||
| Buildings.Controls.OBC.CDL.Reals.Sources.Constant | TColWat | Cold water temperature | |
| Buildings.Controls.OBC.CDL.Reals.Sources.Constant | THotWatSupSet | Hot water supply temperature set point | |
| Buildings.Controls.OBC.CDL.Reals.Sources.Constant | TChiWatSupSet | Chilled water supply temperature set point | |
| Buildings.Controls.OBC.CDL.Reals.Sources.Constant | THeaWatSupMaxSet | Heating water supply temperature set point - Maximum value | |
| Buildings.Controls.OBC.CDL.Reals.Sources.Constant | THeaWatSupMinSet | Heating water supply temperature set point - Minimum value |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |
Revisions
-
May 3, 2023, by David Blum:
First implementation.