modelPipe
Validates the PipeAutosize model initialization
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
Validation model for Buildings.DHC.Networks.Combined.BaseClasses.PipeAutosize for range of flow rates and pressure drops per unit length.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | dp1_length_nominal | 1000 | Pressure drop per unit length 1 |
| Real | dp2_length_nominal | 0.1 | Pressure drop per unit length 2 |
| Modelica.Units.SI.MassFlowRate | m1_flow_nominal | 0.01 | Nominal mass flow rate 1 |
| Modelica.Units.SI.MassFlowRate | m2_flow_nominal | 1000 | Nominal mass flow rate 2 |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Fluid.Sources.Boundary_pT | sin | Sink for water flow | |
| Buildings.DHC.Networks.Pipes.PipeStandard | pipSta1 | Pipe 1 with standard hydraulic diameter | |
| Buildings.Fluid.Sources.MassFlowSource_T | souSta1 | Source of water flow for standard pipe 1 | |
| Buildings.Fluid.Sources.MassFlowSource_T | souAut2 | Source of water flow for autosized pipe 2 | |
| Buildings.DHC.Networks.Pipes.PipeAutosize | pipAut2 | Pipe 2 with autosized hydraulic diameter | |
| Fluid.Sources.MassFlowSource_T | souAut1 | Source of water flow for autosized pipe 1 | |
| Pipes.PipeAutosize | pipAut1 | Pipe 1 with autosized hydraulic diameter | |
| Pipes.PipeStandard | pipSta2 | Pipe 2 with standard hydraulic diameter | |
| Fluid.Sources.MassFlowSource_T | souSta2 | Source of water flow for standard pipe 2 |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |
Revisions
-
December 20, 2023, by Ettore Zanetti:
This is for issue 3431. -
November 18, 2022 by David Blum:
First implementation.
This is for issue 2510.