modelBasicFlowFunction_m_flow_inv_DerivativeCheck
Model that checks the correct implementation of the 1st order derivative of the inverse of the flow function
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
This model validates the implementation of Buildings.Fluid.BaseClasses.FlowModels.basicFlowFunction_m_flow_inv and its first order derivative Buildings.Fluid.BaseClasses.FlowModels.basicFlowFunction_m_flow_inv_der. If the derivative implementation is wrong, the simulation will stop with an error.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | gain | 2 | Gain for computing the pressure difference |
| Real | k | 0.35 | Flow coefficient |
| Modelica.Units.SI.MassFlowRate | m_flow_turbulent | 0.36 | Mass flow rate where transition to turbulent flow occurs |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | m_flow | Mass flow rate | |
| Modelica.Units.SI.MassFlowRate | m_flow_comp | Comparison value for m_flow | |
| Modelica.Units.SI.PressureDifference | dp | Pressure difference | |
| Modelica.Units.SI.MassFlowRate | err | Integration error |
Revisions
-
October 22, 2026, by Michael Wetter:
First implementation.
This is for Buildings, #4798.