modelPartialElectric

Base class for test model of chiller electric EIR
Diagram of PartialElectricOpen the diagram

Parameters

TypeNameDefaultDescription
Modelica.Units.SI.PowerP_nominalNominal compressor power (at y=1)
Modelica.Units.SI.TemperatureDifferencedTEva_nominal10Temperature difference evaporator inlet-outlet
Modelica.Units.SI.TemperatureDifferencedTCon_nominal10Temperature difference condenser outlet-inlet
RealCOPc_nominal3Chiller COP
Modelica.Units.SI.MassFlowRatemEva_flow_nominalNominal mass flow rate at evaporator
Modelica.Units.SI.MassFlowRatemCon_flow_nominalNominal mass flow rate at condenser

Components

TypeNameDefaultDescription
Buildings.Fluid.Sources.MassFlowSource_Tsou1Mass flow source
Buildings.Fluid.Sources.MassFlowSource_Tsou2Mass flow source
Buildings.Fluid.Sources.Boundary_pTsin1Pressure source
Buildings.Fluid.Sources.Boundary_pTsin2Pressure source
Modelica.Blocks.Sources.RampTSetSet point for leaving chilled water temperature
Modelica.Blocks.Sources.RampTCon_inCondenser inlet temperature
Modelica.Blocks.Sources.RampTEva_inEvaporator inlet temperature
Modelica.Blocks.Sources.PulsepulsePulse signal generator
Modelica.Blocks.Logical.GreaterThresholdgreaterThresholdGreater threshold
Buildings.Fluid.FixedResistances.PressureDropres1Flow resistance
Buildings.Fluid.FixedResistances.PressureDropres2Flow resistance

Contents

NameDescription
Medium1Medium model
Medium2Medium model