recordVitocal251A08
A2W Vitocal 251 by Viessmann
Extends from Buildings.Fluid.Chillers.ModularReversible.Data.TableData2D.Generic (Basic chiller data).
Information
Data from the planning book (Planungshandbuch) from Viessmann.
While the product exists in different sizes, this record contains the data for the subtype 251-A08. If you want to model the pressure losses of the device, check out the data sheet and the installed pumps. The pressure loss depends mostly on the hydraulic system according to the datasheet.
The nominal mass flow rate is calculated for the nominal point A7/W35, with a temperature spread of 5 K.
References
Viessmann, Planungshandbuch. https://www.haustechnik-handrich.de/media/pdf/54/c4/14/vie-pa-z022164.pdf.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real[:,:] | tabPEle (from Generic) | Electrical power consumption table, T in K, Q_flow in W | |
| Modelica.Units.SI.MassFlowRate | mCon_flow_nominal (from Generic) | Nominal mass flow rate in condenser | |
| Modelica.Units.SI.MassFlowRate | mEva_flow_nominal (from Generic) | Nominal mass flow rate in evaporator | |
| Modelica.Units.SI.PressureDifference | dpCon_nominal (from Generic) | Nominal pressure drop in condenser | |
| Modelica.Units.SI.PressureDifference | dpEva_nominal (from Generic) | Nominal pressure drop in evaporator | |
| String | devIde (from Generic) | Name of the device | |
| Boolean | use_TEvaOutForTab (from Generic) | if true, use evaporator outlet temperature for table data, otherwise use inlet | |
| Boolean | use_TConOutForTab (from Generic) | if true, use condenser outlet temperature for table data, otherwise use inlet | |
| Real[:,:] | tabQEva_flow (from Generic) | Cooling power consumption table, T in K, Q_flow in W | |
| Real[:,2] | tabLowBou (from Generic) | Points to define lower boundary for source temperature | |
| Boolean | use_TEvaOutForOpeEnv (from Generic) | false | if true, use evaporator outlet temperature for operational envelope, otherwise use inlet |
| Boolean | use_TConOutForOpeEnv (from Generic) | false | if true, use condenser outlet temperature for operational envelope, otherwise use inlet |