modelSingleSpeed

Test model for single speed cooling DX coil

Extends from Modelica.Icons.Example (Icon for runnable examples).

Information

This is a test model for Buildings.Fluid.DXSystems.Cooling.AirSource.SingleSpeed. The model has open-loop control and time-varying input conditions.

Type	Name	Default	Description
Modelica.Units.SI.MassFlowRate	m_flow_nominal	datCoi.sta[datCoi.nSta].nomVal.m_flow_nominal	Nominal mass flow rate
Modelica.Units.SI.PressureDifference	dp_nominal	1000	Pressure drop at m_flow_nominal
Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.DXCoil	datCoi		Coil data

Type	Name	Description
Buildings.Fluid.DXSystems.Cooling.AirSource.SingleSpeed	sinSpeDX	Single speed DX coil
Buildings.Fluid.Sources.Boundary_pT	sin	Sink
Buildings.Fluid.Sources.Boundary_pT	sou	Source
Modelica.Blocks.Sources.BooleanStep	onOff	Compressor on-off signal
Modelica.Blocks.Sources.Ramp	TEvaIn	Temperature
Modelica.Blocks.Sources.Ramp	p	Pressure
Modelica.Blocks.Sources.Constant	TConIn	Condenser inlet temperature

Name	Description
Medium	Fluid medium for the model

March 19, 2023 by Xing Lu and Karthik Devaprasad:
Updated model name and instance class for sinSpeDX.
Updated connection statments to reflect change in input instance in sinSpeDX from TConIn to TOut.
Updated formatting for readability.
January 22, 2016, by Michael Wetter:
Corrected type declaration of pressure difference. This is for #404.
December 22, 2014 by Michael Wetter:
Removed Modelica.Fluid.System to address issue #311.
April 12, 2012 by Kaustubh Phalak:
First implementation.