modelSingleSpeed
Test model for single speed DX heating coil
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
This is an example model for Buildings.Fluid.DXSystems.Heating.AirSource.SingleSpeed. The model has time-varying control signals and input conditions.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | datCoi.sta[datCoi.nSta].nomVal.m_flow_nominal | Nominal mass flow rate |
| Modelica.Units.SI.PressureDifference | dp_nominal | 1000 | Pressure drop at m_flow_nominal |
| Buildings.Fluid.DXSystems.Heating.AirSource.Data.Generic.DXCoil | datCoi | DX heating coil data record |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Fluid.DXSystems.Heating.AirSource.SingleSpeed | sinSpeDX | Single speed DX coil | |
| Buildings.Fluid.Sources.Boundary_pT | sin | Sink | |
| Buildings.Fluid.Sources.Boundary_pT | sou | Source | |
| Modelica.Blocks.Sources.BooleanStep | onOff | Compressor on-off signal | |
| Modelica.Blocks.Sources.Ramp | TConIn | Temperature | |
| Modelica.Blocks.Sources.Ramp | p | Pressure | |
| Modelica.Blocks.Sources.Constant | TEvaIn | Evaporator inlet temperature | |
| Modelica.Blocks.Sources.Constant | phi | Outside air relative humidity |
Contents
| Name | Description |
|---|---|
 Medium | Fluid medium for the model |
Revisions
-
March 08, 2023 by Xing Lu and Karthik Devaprasad:
First implementation.