modelInletToAirMoistAirCO2

Validation model for inlet to Buildings.Media.Air conversion with C02 trace substances
Diagram of InletToAirMoistAirCO2Open the diagram
▶ Simulate in your browser

Extends from Buildings.Fluid.FMI.Conversion.Validation.InletToAirDryAir (Validation model for inlet to air with dry air medium).

Information

This example validates the conversion model Buildings.Fluid.FMI.Conversion.InletToAir . It is identical to Buildings.Fluid.FMI.Conversion.Validation.InletToAirMoistAir except that the medium has C02 trace substances.

Parameters

TypeNameDefaultDescription
Booleanuse_p_in (from InletToAirMoistAir)false= true to use a pressure from connector, false to output Medium.p_default

Components

TypeNameDefaultDescription
Modelica.Blocks.Sources.Constantm_flow (from InletToAirMoistAir)Mass flow rate
Modelica.Blocks.Sources.ConstantT (from InletToAirMoistAir)Room temperature
Buildings.Fluid.FMI.Conversion.InletToAirconAir (from InletToAirMoistAir)Converter for air
Source_Tsou (from InletToAirMoistAir)Source for mass flow rate and pressure
Modelica.Blocks.Sources.ConstantpIn (from InletToAirMoistAir)Inlet pressure
Modelica.Blocks.Sources.ConstantX_w_in (from InletToAirMoistAir)Inlet mass fraction
Modelica.Blocks.Sources.Constant[Medium.nC]C (from InletToAirMoistAir)Trace substances for forward flow
Buildings.Fluid.FMI.Conversion.InletToAirconAirRevFlo (from InletToAirMoistAir)Converter for air with reverse flow
Source_TsouRev (from InletToAirMoistAir)Source for mass flow rate and pressure with reverse flow
Modelica.Blocks.Sources.ConstantTRev (from InletToAirMoistAir)Temperature for reverse flow
Modelica.Blocks.Sources.ConstantX_w (from InletToAirMoistAir)Mass flow fraction for reverse flow
Modelica.Blocks.Sources.Constant[Medium.nC]CRevTrace substance for reverse flow

Revisions

  • June 29, 2016, by Michael Wetter:
    Added validation test for reverse flow.
  • April 28, 2016 by Thierry S. Nouidui:
    First implementation.