modelPlugFlowPipe
Simple example of plug flow pipe
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
Basic test of model Buildings.Fluid.FixedResistances.PlugFlowPipe with and without outlet mixing volume. This test includes an inlet temperature step under a constant mass flow rate.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | 3 | Mass flow rate |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Sources.Ramp | Tin | Ramp pressure signal | |
| Sources.Boundary_pT | sin | Pressure boundary condition | |
| Buildings.Fluid.FixedResistances.PlugFlowPipe | pip | Pipe | |
| Buildings.HeatTransfer.Sources.FixedTemperature[2] | bou | Boundary temperature | |
| Buildings.Fluid.Sources.MassFlowSource_T | sou | Flow source | |
| Buildings.Fluid.Sensors.TemperatureTwoPort | senTemOut | Temperature sensor | |
| Buildings.Fluid.Sensors.TemperatureTwoPort | senTemIn | Temperature sensor | |
| Sensors.TemperatureTwoPort | senTemInNoMix | Temperature sensor | |
| Buildings.Fluid.FixedResistances.PlugFlowPipe | pipNoMix | Pipe | |
| Sensors.TemperatureTwoPort | senTemOutNoMix | Temperature sensor | |
| Sources.MassFlowSource_T | souNoMix | Flow source |
Contents
| Name | Description |
|---|---|
 Medium | Medium in the pipe |
Revisions
- July 27, 2021 by Baptiste Ravache
Add case without mixing volume
- September 8, 2017 by Bram van der Heijde
First implementation