modelEvaporatorCondenser
Test model for the evaporator or condenser model
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
Model that demonstrates the use of the Buildings.Fluid.HeatExchangers.EvaporatorCondenser model.
The fluid flow rate is increased from ṁ = 0.01 kg/s to ṁ = 0.10 kg/s over 100 seconds. As a result, the heat exchanger effectiveness and the fluid temperature difference in the heat exchanger decrease.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | 0.01 | Nominal mass flow rate |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.HeatTransfer.Sources.FixedTemperature | ref | Refrigerant temperature | |
| Modelica.Thermal.HeatTransfer.Sensors.HeatFlowSensor | heaFlo | Heat flow rate sensor | |
| Modelica.Fluid.Sources.MassFlowSource_T | sou | Flow source | |
| Modelica.Fluid.Sources.FixedBoundary | sin | Sink | |
| Buildings.Fluid.HeatExchangers.EvaporatorCondenser | eva | Evaporator | |
| Modelica.Blocks.Sources.Ramp | m_flow | Mass flow rate | |
| Buildings.Fluid.Sensors.TemperatureTwoPort | senTem | Temperature sensor |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |
Revisions
-
October 11, 2016, by Massimo Cimmino:
First implementation.